The Yamaha RX-V385 versus Onkyo TX-NR585 comparison makes clear all pros and cons of AV receivers. According to the results of our review, Yamaha RX-V385 received 5 points out of 10 possible, and Onkyo TX-NR585 was rated 7.4 points. Both AV receivers were introduced in 2018. Identified advantages have shown that TX-NR585 is better over RX-V385 mainly as a home theater processor.
For the built-in amplifier, the devices received different marks - 5 and 8, respectively, on a 10-point scale.
The number of channels is equal to the number of possible connected speakers. The Yamaha RX-V385 supports 5.1-channels sound, but Onkyo TX-NR585 supports a 7.2-channels configuration.
RMS stands for the actual power of the receiver. The higher this value, the louder the sound can be produced. The differences between the models in terms of RMS power are significant - for the TX-NR585 this value is 170/6 W/Ohm, and for the RX-V385 it is 70/6 W/Ohm.
|Stereo power (RMS), W/Ohm||70/6||80/8, 170/6|
|Output impedance, Ohm||6||8, 6|
|THD in stereo, %||0.09||0.08|
After reviewing the audio features of each model, we can rate the RX-V385 6 out of 10, and the TX-NR585 - 9.
Bi-amping is the amplification of one speaker with two amplifiers. This amplification method has a positive effect on sound quality. Bi-amping is possible on the TX-NR585.
Most receivers now come with a microphone included. It is with the help of this microphone that the auto-calibration system functions, which adjusts the sound of the receiver to the room.
|Digital to analog converter (DAC)||Burr-Brown 384 KHz/32-bit||AK4458 384 KHz/32-bit|
|Pure direct (straight)||✔||✔|
|Auto speaker calibration||YPAO||AccuEQ|
|Speaker A/B switching||✖||✖|
|Other audio features||CINEMA DSP, Compressed Music Enhancer, Virtual CINEMA FRONT||Theater-Dimensional, Hi-Res audio|
The connectivity of competitors in our comparison is markedly different, Yamaha RX-V385 scored 5, and Onkyo TX-NR585 scored 8 out of 10.
Bluetooth connection is now one of the main communication protocols for the receiver's control or even music broadcasting.
Wired internet connection via RJ45 allows receiver faster connection than wireless or even use NAS storages. Wired connection via RJ45 is possible in the TX-NR585 only.
|USB||1 (USB 2.0)||1 (USB 2.0)|
Now music streaming services are gaining more and more popularity. They allow users to listen to millions of songs by subscription.
|Apple Music (AirPlay)||AirPlay||AirPlay|
|Other streaming services||has not||Deezer, TIDAL, Pandora, TuneIn Radio|
The presence of many connectors makes the receiver more versatile. But there are also narrowly targeted models, the number of connectors which are limited to a certain area of use. And when choosing their own receiver, users need to consider exactly your goals for using the receiver. For extensive connection, Yamaha RX-V385 got 6 points, but Onkyo TX-NR585 received 8 points.
Yamaha RX-V385 is equipped with 4/1 HDMI inputs and outputs, and Onkyo TX-NR585 has 7/1 HDMI inputs and outputs.
HDMI eARC is the next step in the development of audio return channel technology, which works in conjunction with HDMI 2.1. Using eARC provides the highest sound quality for home audio systems. HDMI eARC is available only on Yamaha RX-V385.
Connecting a vinyl player or phonograph is possible using a Phono input which is represented by mini-jack or RCA connectors. Only the TX-NR585 has a Phono interface.
|HDMI ARC (Audio Return Channel)||✔||✔|
|HDMI eARC (Enhanced Audio Return Channel)||✔||✖|
|Digital content protection (HDCP)||HDCP 2.2||HDCP 2.2|
|Subwoofer output (LFE)||1||2|
|Headphone output||1 x 6.3||1 x 6.3|
|Optical digital input||1||2|
|Coaxial digital input||2||1|
|Phono (MM) input||✖||✔|
|Front panel connectors||USB, phones, setup mic, AUX||HDMI, phones, setup mic, AUX|
|Multi channel preamp output||✖||✖|
The AV receiver is the heart of the home theater. And in this case, support for all current video formats ensures the best user experience, so it is very important to consider this when choosing a device. Video features of the RX-V385 were rated 8 out of 10 against the 7 for the TX-NR585.
Most of the AV receivers have a video scaling function, it is the process of reformatting the video signal to a higher resolution without losing the quality of the image. Upscaling the video signal resolution is possible only with Yamaha RX-V385.
|HDR (High Dynamic Range)||HDR10||HDR10|
|4K signal pass-through||4K/60Hz||4K/60Hz|
|8K signal pass-through||✖||✖|
|HDMI signal pass-through||✔||✔|
|3D signal pass-through||✔||✔|
|HDMI pass-through in standby mode||✔||✔|
|Analog to HDMI scaling||✔||✖|
|HDMI to HDMI scaling||✔||✖|
|Other video features||DeepColor, x.v.Color||BT.2020, HLG|
In terms of evaluating additional features, the RX-V385 got 6 points, but the TX-NR585 has 7.
Voice control allows you to control the basic functions of the receiver through a smartphone, smart speaker or using the microphone that comes with the kit. The TX-NR585 can be controlled by voice via Google Assistant. Only the Yamaha RX-V385 has the ECO mode.
|Voice control||✖||Google Assistant|
|App control||iPhone, iPod, Android||iPhone, iPod, Android|
|Tuner||AM, FM||AM, FM|
|Auto power off||✔||✖|
|Graphical user interface (GUI)||✖||✔|
|Firmware update||USB||network, USB|
|Other additional features||has not||IP Control|
As the center of a home media system, each multichannel receiver has an additional set of terminals for connecting the second set of speakers to create additional audio space in Zone 2 or even Zone 3 where audio can have the separate source.
|Multi-room zones||has not||2|
|Zone audio output||has not||speaker, preout|
|Zone HDMI output||has not||✖|
|Multi-room control||has not||FlareConnect|
|Remote control input/output (IR)||0/0||0/0|
|DC trigger output (12V)||0||0|
Yamaha RX-V385 got 5 points for the multichannel surround sound and Onkyo TX-NR585 got 7.
Dolby Atmos' particularity is that this is the object-oriented sound format, that is, each audio signal object is independently sounded and connected to its spatial position. Onkyo TX-NR585 can create 3D sound due to the Dolby Atmos support.
DTS:X is an algorithm used by the processor to create sound scenes, where sounds connected directly to objects rather than channels, and to determine the optimum sound output distribution in space. Surround sound with DTS:X is available on the TX-NR585.
|Dolby (other)||Dolby Digital Plus, Dolby Pro Logic||Dolby Digital Plus|
|DTS HD Master||✔||✔|
|DTS (other)||DTS 96/24, DTS-HD, DTS-EXPRESS, DTS-Surround, DTS-Neo:6||DTS-ES, DTS 96/24, DTS-HD, DTS-EXPRESS|