Yamaha RX-V485BL vs Marantz SR6013

If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Votes 1 1
Rating 5 5

RX-V485BL vs SR6013 comparison chart

Yamaha RX-V485BL vs Marantz SR6013 review

Yamaha RX-V485BL
vs
Marantz SR6013

To get informed with the specs of the receivers, we suggest you read the Yamaha RX-V485BL and Marantz SR6013 review. According to the results of our review, Yamaha RX-V485BL received 6.6 points out of 10 possible, and Marantz SR6013 was rated 9.1 points. Both AV receivers were introduced in 2018. This review shows us that the SR6013 is a better choice as a home AV receiver than the RX-V485BL.

Main advantages Yamaha RX-V485BL over Marantz SR6013

  • We do not know advantages

Main advantages Marantz SR6013 over Yamaha RX-V485BL

  • More channels, namely 9, makes this receiver more profitable than its 5-channel competitor.
  • Surround sound ensures the availability of Dolby Atmos.
  • Object-oriented sound ensures the availability of DTS:X.

Amplifiers

For the built-in amplifier, the devices received different marks - 5 and 9, respectively, on a 10-point scale.

RX-V485BL
5
SR6013
9

The number of channels is equal to the number of possible connected speakers. The Yamaha RX-V485BL supports 5.1-channels sound, but Marantz SR6013 supports a 9.2-channels configuration.

RMS stands for the actual power of the receiver. The higher this value, the louder the sound can be produced. The differences between the models in terms of RMS power are significant - for the SR6013 this value is 150/6 W/Ohm, and for the RX-V485BL it is 80/6 W/Ohm.

RX-V485BL SR6013
Channels5.19.2
Stereo power (RMS), W/Ohm80/6110/8, 150/6
Output impedance, Ohm68, 6
Frequency response10Hz-100KHz10Hz-100KHz
THD in stereo, %0.090.08

Audio features

After reviewing the audio features of each model, we can rate the RX-V485BL 9 out of 10, and the SR6013 - 10.

RX-V485BL
9
SR6013
10

Most receivers now come with a microphone included. It is with the help of this microphone that the auto-calibration system functions, which adjusts the sound of the receiver to the room.

Speaker A/B switching allows you to change between the main and sub speaker set. Marantz SR6013 can work with the main and additional set of speakers - and switch between them.

RX-V485BL SR6013
Digital to analog converter (DAC)Burr-Brown 384 KHz/32-bitAK4458 384 KHz/32-bit
Bi-amping
Pure direct (straight)
Auto speaker calibrationYPAOAudyssey MultEQ XT32
Speaker A/B switching
Other audio featuresCINEMA DSP, Compressed Music Enhancer, Virtual CINEMA FRONTAudyssey Dynamic Volume, Audyssey Dynamic EQ, Audyssey LFC, Compressed Audio Enhancer(MDAX2), Hi-Res audio

Connectivity

The connectivity of competitors in our comparison is equal and was rated 8 out of 10.

RX-V485BL
8
SR6013
8

Bluetooth connection is now one of the main communication protocols for the receiver's control or even music broadcasting.

RX-V485BL SR6013
Wi-Fi2.4/5GHz2.4/5GHz
USB1 (USB 2.0)1 (USB 2.0)
Bluetooth
Ethernet (RJ45)11
DLNA
MHL

Streaming services

Now music streaming services are gaining more and more popularity. They allow users to listen to millions of songs by subscription.

RX-V485BL SR6013
Apple Music (AirPlay)AirPlay, AirPlay 2AirPlay, AirPlay 2
Amazon Music
Spotify
Other streaming serviceshas notDeezer, TIDAL, Pandora, TuneIn Radio

Extensive connections

The presence of many connectors makes the receiver more versatile. But there are also narrowly targeted models, the number of connectors which are limited to a certain area of use. And when choosing their own receiver, users need to consider exactly your goals for using the receiver. For extensive connection, Yamaha RX-V485BL got 6 points, but Marantz SR6013 received 10 points.

RX-V485BL
6
SR6013
10

Yamaha RX-V485BL is equipped with 4/1 HDMI inputs and outputs, and Marantz SR6013 has 8/3 HDMI inputs and outputs.

Connecting a vinyl player or phonograph is possible using a Phono input which is represented by mini-jack or RCA connectors. Only the SR6013 has a Phono interface.

RX-V485BL SR6013
HDMI input/output4/18/3
HDMI ARC (Audio Return Channel)
HDMI eARC (Enhanced Audio Return Channel)
HDMI CEC
Digital content protection (HDCP)HDCP 2.2HDCP 2.2
Subwoofer output (LFE)12
Headphone output1 x 6.31 x 6.3
Optical digital input22
Coaxial digital input12
Composite input23
Component input/output0/02/1
Phono (MM) input
Front panel connectorsUSB, phones, setup mic, AUXUSB, HDMI, phones, setup mic, AUX
Multi channel preamp output

Video features

The AV receiver is the heart of the home theater. And in this case, support for all current video formats ensures the best user experience, so it is very important to consider this when choosing a device. Video features of the RX-V485BL were rated 8 out of 10 against the 9 for the SR6013.

RX-V485BL
8
SR6013
9

RX-V485BL SR6013
HDR (High Dynamic Range)HDR10
4K signal pass-through4K/60Hz4K/60Hz
8K signal pass-through
HDMI signal pass-through
3D signal pass-through
HDMI pass-through in standby mode
Video conversionanalog to HDMI
Analog to HDMI scaling
HDMI to HDMI scaling
Dolby Vision
Other video featuresBT.2020, HLGHLG

Additional features

In terms of evaluating additional features, the RX-V485BL got 8 points, but the SR6013 has 10.

RX-V485BL
8
SR6013
10

RX-V485BL SR6013
Voice controlGoogle AssistantAmazon Alexa, Google Assistant, Siri, Josh.AI
App controliPhone, iPad, iPod, AndroidiPhone, iPad, iPod, Android
Displaycolour OSDcolour OSD
TunerAM, FMAM, FM
Sleep timer
Auto power off
ECO mode
Graphical user interface (GUI)
Setup assistant
Firmware updatenetwork, USBnetwork, USB
Other additional featureshas notIP Control, Web Control

Multi-room

As the center of a home media system, each multichannel receiver has an additional set of terminals for connecting the second set of speakers to create additional audio space in Zone 2 or even Zone 3 where audio can have the separate source.

RX-V485BL SR6013
Multi-room zones22
Zone audio outputspeakerspeaker, preout
Zone HDMI output
Multi-room controlMusicCastMarantz AVR Remote App, HEOS App
RS-23201
Remote control input/output (IR)0/01/0
DC trigger output (12V)01

Multichannel surround

Yamaha RX-V485BL got 5 points for the multichannel surround sound and Marantz SR6013 got 9.

RX-V485BL
5
SR6013
9

Dolby Atmos' particularity is that this is the object-oriented sound format, that is, each audio signal object is independently sounded and connected to its spatial position. Marantz SR6013 can create 3D sound due to the Dolby Atmos support.

DTS:X is an algorithm used by the processor to create sound scenes, where sounds connected directly to objects rather than channels, and to determine the optimum sound output distribution in space. Surround sound with DTS:X is available on the SR6013.

Auro 3D gives a bit more versatility than Dolby Atmos or DTS:X and provides a hemispherical sound and enables a receiver to produce 3D sound stages. Marantz SR6013 has Auro-3D on its feature list.

RX-V485BL SR6013
Dolby Atmos
Dolby TrueHD
Dolby Surround
Dolby (other)Dolby Digital Plus, Dolby Pro LogicDolby Digital Plus
DTS:X
DTS HD Master
DTS Virtual:X
DTS Neural:X
DTS (other)DTS 96/24, DTS-HD, DTS-EXPRESS, DTS-Surround, DTS Neo:6DTS-ES, DTS 96/24, DTS-HD, DTS-EXPRESS, DTS-Surround
Auro-3D
IMAX Enhanced
Multichannel stereo
Add another receiver to comparison
We didn't find anything to show here