The Denon AVR-X3500H vs Onkyo TX-SR373 comparison makes sense because it shows what devices in their segments can offer. According to the results of our review, Denon AVR-X3500H received 8.4 points out of 10 possible, and Onkyo TX-SR373 was rated 4.2 points. The release date of AVR-X3500H is 2018, and TX-SR373 is 2017. AVR-X3500H is more suitable as the heart of home theater system than its opponent - TX-SR373.
For the built-in amplifier, the devices received different marks - 8 and 6, respectively, on a 10-point scale.
The number of channels is equal to the number of possible connected speakers. The Denon AVR-X3500H supports 7.2-channels sound, but Onkyo TX-SR373 supports a 5.1-channels configuration.
RMS stands for the actual power of the receiver. The higher this value, the louder the sound can be produced. In terms of RMS power, the models have the same characteristics - 105/8, 135/6/6 W/Ohm.
|Stereo power (RMS), W/Ohm||105/8, 135/6||135/6|
|Output impedance, Ohm||8, 6||6|
|THD in stereo, %||0.05||0.06|
After reviewing the audio features of each model, we can rate the AVR-X3500H 8 out of 10, and the TX-SR373 - 5.
Bi-amping is the amplification of one speaker with two amplifiers. This amplification method has a positive effect on sound quality. Bi-amping is possible only on the AVR-X3500H.
Pure Direct mode feeds sound directly to the amplifier and bypasses any DSP processing. Only Denon AVR-X3500H has Pure Direct mode.
Most receivers now come with a microphone included. It is with the help of this microphone that the auto-calibration system functions, which adjusts the sound of the receiver to the room.
Speaker A/B switching allows you to change between the main and sub speaker set. Denon AVR-X3500H can work with the main and additional set of speakers - and switch between them.
|Digital to analog converter (DAC)||AKM 192 KHz/32-bit||192 KHz/24-bit|
|Pure direct (straight)||✔||✖|
|Auto speaker calibration||Audyssey MultEQ XT32||AccuEQ|
|Speaker A/B switching||✔||✖|
|Other audio features||Audyssey Dynamic Volume, Audyssey Dynamic EQ, Audyssey LFC, Compressed Audio Restorer||has not|
The connectivity of competitors in our comparison is markedly different, Denon AVR-X3500H scored 8, and Onkyo TX-SR373 scored 5 out of 10.
Bluetooth connection is now one of the main communication protocols for the receiver's control or even music broadcasting.
Wired internet connection via RJ45 allows receiver faster connection than wireless or even use NAS storages. Wired connection via RJ45 is possible in the AVR-X3500H only.
|USB||1 (USB 2.0)||1 (USB 2.0)|
Now music streaming services are gaining more and more popularity. They allow users to listen to millions of songs by subscription.
|Apple Music (AirPlay)||AirPlay, AirPlay 2||✖|
|Other streaming services||Deezer, TIDAL, Pandora, TuneIn Radio||has not|
The presence of many connectors makes the receiver more versatile. But there are also narrowly targeted models, the number of connectors which are limited to a certain area of use. And when choosing their own receiver, users need to consider exactly your goals for using the receiver. For extensive connection, Denon AVR-X3500H got 8 points, but Onkyo TX-SR373 received 6 points.
Denon AVR-X3500H is equipped with 8/3 HDMI inputs and outputs, and Onkyo TX-SR373 has 4/1 HDMI inputs and outputs.
Connecting a vinyl player or phonograph is possible using a Phono input which is represented by mini-jack or RCA connectors. Only the AVR-X3500H has a Phono interface.
|HDMI ARC (Audio Return Channel)||✔||✔|
|HDMI eARC (Enhanced Audio Return Channel)||✖||✖|
|Digital content protection (HDCP)||HDCP 2.2||HDCP 2.2|
|Subwoofer output (LFE)||2||1|
|Headphone output||1 x 6.3||1 x 6.3|
|Optical digital input||2||1|
|Coaxial digital input||2||1|
|Phono (MM) input||✔||✖|
|Front panel connectors||USB, HDMI, phones, setup mic||USB, phones, setup mic|
|Multi channel preamp output||✔||✖|
The AV receiver is the heart of the home theater. And in this case, support for all current video formats ensures the best user experience, so it is very important to consider this when choosing a device. Video features of the AVR-X3500H were rated 10 out of 10 against the 5 for the TX-SR373.
Most of the AV receivers have a video scaling function, it is the process of reformatting the video signal to a higher resolution without losing the quality of the image. Upscaling the video signal resolution is possible only with Denon AVR-X3500H.
|HDR (High Dynamic Range)||HDR10||✔|
|4K signal pass-through||4K/60Hz||4K/60Hz|
|8K signal pass-through||✖||✖|
|HDMI signal pass-through||✔||✔|
|3D signal pass-through||✔||✔|
|HDMI pass-through in standby mode||✔||✔|
|Video conversion||analog to HDMI||✖|
|Analog to HDMI scaling||✔||✖|
|HDMI to HDMI scaling||✔||✖|
|Other video features||HLG, BT.2020||DeepColor, x.v.Color|
In terms of evaluating additional features, the AVR-X3500H got 10 points, but the TX-SR373 has 5.
Voice control allows you to control the basic functions of the receiver through a smartphone, smart speaker or using the microphone that comes with the kit. The AVR-X3500H can be controlled by voice via Amazon Alexa, Google Assistant, Siri, Josh.AI. Only the Denon AVR-X3500H has the ECO mode.
|Voice control||Amazon Alexa, Google Assistant, Siri, Josh.AI||✖|
|App control||iPhone, iPad, iPod, Android, Amazon Kindle||iPhone, iPod, Android|
|Tuner||AM, FM||AM, FM|
|Auto power off||✔||✔|
|Graphical user interface (GUI)||✔||✖|
|Firmware update||network, USB||USB|
|Other additional features||IP Control||has not|
As the center of a home media system, each multichannel receiver has an additional set of terminals for connecting the second set of speakers to create additional audio space in Zone 2 or even Zone 3 where audio can have the separate source.
|Multi-room zones||2||has not|
|Zone audio output||speaker, preout||has not|
|Zone HDMI output||✔||has not|
|Multi-room control||HEOS App||has not|
|Remote control input/output (IR)||1/1||0/0|
|DC trigger output (12V)||1||0|
Denon AVR-X3500H got 7 points for the multichannel surround sound and Onkyo TX-SR373 got 5.
Dolby Atmos' particularity is that this is the object-oriented sound format, that is, each audio signal object is independently sounded and connected to its spatial position. Denon AVR-X3500H can create 3D sound due to the Dolby Atmos support.
DTS:X is an algorithm used by the processor to create sound scenes, where sounds connected directly to objects rather than channels, and to determine the optimum sound output distribution in space. Surround sound with DTS:X is available only on the AVR-X3500H.
|Dolby (other)||Dolby Digital Plus||Dolby Digital Plus|
|DTS HD Master||✔||✖|
|DTS (other)||DTS-ES, DTS 96/24, DTS-HD, DTS-EXPRESS, DTS-Surround||DTS 96/24, DTS-HD|